dc.contributor.author |
Полонський, Леонід Григорович |
|
dc.contributor.author |
Кравченко, Максим Павлович |
|
dc.contributor.author |
Лошенков, Олександр Григорович |
|
dc.contributor.author |
Машовець, Наталія Сергіївна |
|
dc.date.accessioned |
2016-07-07T12:31:27Z |
|
dc.date.available |
2016-07-07T12:31:27Z |
|
dc.date.issued |
2011 |
|
dc.identifier.uri |
http://eztuir.ztu.edu.ua/123456789/4410 |
|
dc.description.abstract |
Спосіб визначення оптимального припуску на механічну обробку виробів з газотермічними покриттями включає обробку зразка, враховуючи дефектний прошарок, з пошаровим видаленням покриття за кількість проходів, рівну частці від ділення товщини покриття на величину глибини різання, яку вибирають мінімально можливою для використовуваного обладнання і кратною товщині покриття. При кожному проході визначають силу різання. Далі, за оптимальний припуск приймають такий, що дорівнює сумарній величині товщин прошарків, які передують якісній зоні, при видаленні котрої сила різання має найбільше значення і тримається на такому ж рівні при знятті чергових прошарків у її товщині. Нижня межа припуску знаходитиметься на початку якісної зони або в її товщі. При цьому поверхня, яка утвориться при спрацюванні виробу на величину допустимого зносу, не вийде за межі якісної зони. Технічний результат: підвищення зносостійкості поверхонь виробів з газотермічними напиленими покриттями. |
uk_UA |
dc.language.iso |
uk |
uk_UA |
dc.publisher |
ЖДТУ |
uk_UA |
dc.relation.ispartofseries |
95566; |
|
dc.title |
Спосіб визначення оптимального припуску на механічну обробку виробів з газотермічними покриттями |
uk_UA |
dc.title.alternative |
Method of determining optimal allowance for machining products with gas-thermal coatings |
uk_UA |
dc.type |
Other |
uk_UA |
dc.description.abstracten |
A method of determining an optimal allowance for machining products with gas-thermal coatings includes treatment of a sample taking into account a defective layer, with layer-by-layer removal of the coating for the number of passes equal to the quotient of the coating thickness by the value of cutting depth, which is chosen as small as possible for the equipment used and multiple to the coating thickness. The cutting force is determined at each pass. Further, for optimal allowance such an allowance is taken that equals to the total thickness of layers preceding the qualitative area, at removal of which the cutting force has a maximum value and remains at that level when removing the next layer in its thickness. The lower limit of allowance is located at the beginning of qualitative area or in its thickness. The surface, which is formed when the device is triggered for the value of allowable wear, will not go beyond high-quality area. Effect: increased durability of surfaces of products with gas-thermal spray coatings. |
uk_UA |